ELECTRICAL ENGINEERING.

 

 

 

 

Bachelor’s Degree Holder in ELECTRICAL ENGINEERING

 

Diploma Holder in ELECTRONICS ENGINEERING TECHNOLOGY

 

Eligibility          : PASSED PRC NO. 0012511 – REGISTERED ELECTRICAL ENGINEER

 

Eligibility          : PASSED CAREER SERVICE PROFESSIONAL (CSC)

 

Eligible            : ELECTRONICS LABORATORY TECHNICIAN   (CSC)

 

Contact no.     : +966 569690939 – KINGDOM OF SAUDI ARABIA

 

Email Address: catambacan_a@yahoo.com

 

Website          : www.antonio-catambacan.webs.com

 

 

A Professional Instrumentation, Control, Automation, Electrical, & Electronics Technologist with total of 35 years experiences, 26 years of it from working abroad and 9 years in the Philippines for all areas of Electrical, Instrumentation and Control Systems Automation.

 

 

 

Profile Summary

 

 

 

An ambitious, dedicated and fast learner with an inner initiative and workaholic attitude, strive under pressure and take pride in working to deadlines, and meeting targets on time. Posses a robust understanding of the complexities of Electrical, Instrumentation and Control Systems Automation

 

 

 

Presently involve as Project Management Consultant (PMC) with MARAFIQ Steam Turbine Power Generation 5 & 6. Involve in the inspections and specifications of Instrumentation materials, instruments, controls, DCS systems, PLC systems and field instrumentation for 2 units of 275MW Steam Turbine Power Generation. Implement of approved P&ID, Hook-up drawings, Cable schedules, and Standard Instrumentation practices. Conduct quality inspections and pre-commissioning and start-up of field instruments and controls for Boilers, FGD, ESP, CEMS, CPP, WTP, FOPS, Demineralization plant and 275MW Steam Turbine Generator.

 

 

 

Involved in the instruments calibration, start-up, repair & maintenance of 28 units (Frame 5, 6, 6FA & 9 DLN) Gas Turbine Power Plant using Mark II, Mark IV, Mark V, & Mark VI GE Speedtronics Gas Turbine Control System used in the Petroleum Development of Oman (PDO) for their Oil and Gas oilfields, gathering stations, & refineries under contract by Thomassen Services & contracting Co. LLC.

 

 

 

Involved in the supervision of the construction, erection, calibration, pre-commissioning, start-up and testing of process instruments and control devices associated with the Desalination plant

 

 

 

Involved in the inspection of erected process instruments, and control devices to see to it that it conform the installation standard for efficient process control system

 

 

 

Involved in the erection, construction, commissioning of 2 units 15 MW Frame 5 GAS TURBINE and SENTINEL C GAS TURBINE CONTROL SYSTEM in the Kingdom of Bahrain

 

 

 

Experienced in the construction of all areas of Electrical, Instrumentation, Control Systems Automation, commissioning, start-up; and total maintenance of one of the biggest Copper and Gold Processing Plant in the Sultanate of Oman

 

 

 

I was a Lead Engineer, supervising the construction, commissioning, and start-up of 1200 tons/day Mega Paper Mill in Indonesia. I have followed construction as a field engineer, and owner’s representative, supervising the contractor, and make field changes necessary to improve or correct design errors or omissions. I am also an active participant in Calibration, loop checkout, and starting up pneumatics and electronics instruments and control devices.

 

 

 

Developed and implemented a Computerized Maintenance Management System (CMMS) for efficient Proactive and Preventive Maintenance function to minimize operation downtime, resulting to machine excellent run ability, which reduces maintenance cost, resulting to increase profitability.

 

 

 

Actively participated in the formulation of Calibration Procedures and forms for the certification of ISO9002 product quality assurance, and implementation of such procedures and forms to maintain the ISO9002 Product Quality Assurance Requirements

 

 

 

I was sent for Trainings on Machine Control System (MCS), Distributed Control System (DCS), Programmable Logic Controllers (PLC) and Observations of process control system and automation in one of the biggest Paper Industry in Valmet-Finland, Bielomatik-Germany, Actipac-Sweden, and Rockwell-Automation-Singapore for Allen Bradley Programmable Logic Controllers (PLC) system design, programming and maintenance.

 

 

 

Attended training course of HONEYWELL EPKS Distributed Control System (DCS) use in PDO Power Plant 1 and 2 DCS control system in Mukahizna, Sultanate of Oman

 

 

 

 

 

TRAININGS AND SKILLS

 

 

 

Specialized in Instrumentation and Control / Automation System using Allen Bradley 1785 PLC-5 / Advant 450 ABB – DCS / VALMET Damatic XD MCS system / Honeywell EPKS – DCS System.

 

 

Knowledge in Computer software operation like MS OFFICE Professional.

 

 

 

 

A: TRAININGS / SEMINARS ATTENDED:

 

 

 

I. INSTRUMENTATION, CONTROL & AUTOMATION

 

 

 

1. EXPERION PROCESS KNOWLEDGE SYSTEM (EPKS)                                    8 – 12 / 03 /2008

 

(Honeywell DCS for BOP Power Generation Control)

 

PDO Mukahizna Power Project

 

Mukahizna, Sultanate of Oman

 

 

 

2. SENTINEL C GAS TURBINE CONTROL SYSTEM                                         2 – 6 / 04 /2005

 

(PLC 5 CONFIGURED GAS TURBINE CONTROL SYSTEM)

 

MASOOD JOHN BROWN INTERNATIONAL

 

FREE PORT, DUBAI, UNITED ARAB EMIRATES

 

 

 

3. VALMET DAMATIC XD PROGRAMMING COURSE                                                 22 – 27 / 07 / 1997

 

(PAPER MACHINE MCS)

 

TAMPERE, FINLAND

 

 

 

4. VALMET DAMATIC XD BASIC & MAINTENANCE COURSE                         28/07/1997 – 01/08/1997

 

(PAPER MACHINE MCS)

 

TAMPERE, FINLAND

 

 

 

5. ACTIPAC PACKAGING SYSTEMS                                                                          22 – 25/ 05 / 1997

 

Using Allen Bradley 1785 PLC-5 system

 

GOTENBERG, SWEDEN

 

 

 

6. BIELOMATIK FOLIO, CUTSIZE SHEETERS, WRAPPING, CARTONIZER       26 – 29/ 05 / 1997

 

AUTOMATION WITH ALLEN BRADLEY PLC-5 System

 

NEUFEN, GERMANY

 

 

 

7. MAINTENANCE & TROUBLESHOOTING THE 1785 PLC-5                            03 – 06 / 03 / 1997

 

Allen-Bradley Programmable Logic Controllers

 

Rockwell-Automation, Singapore

 

 

 

8. PROGRAMMING THE 1785 PLC-5 CONTROLLERS                                      31 / 03 – 03 / 04 / 1997

 

Allen-Bradley Programmable Logic Controllers

 

Rockwell-Automation, Singapore

 

 

 

9.1785 PLC SYSTEM DESIGN & ADVANCE PLC’S PROGRAMMING                05 – 09 / 05 / 1997

 

Allen-Bradley Programmable Logic Controllers

 

Rockwell-Automation, Singapore

 

 

 

10. SYSTEM PROTECTION AND RELAYING

 

MSU-IIT, Iligan City, Philippines

 

 

 

11. HOW TO BE AN EFFECTIVE SUPERVISOR

 

Cellophil Resources Corporation

 

Gadddani, Tayum , Abra, Philippines

 

 

 

 

 

12. INTRODUCTION TO MANAGEMENT BY OBJECTIVES

 

Cellophil Resources Corporation

 

Gaddani,Tayum,Abra,PhilippineS

 

 

 

 

 

II. HEALTH, SAFETY & ENVIRONMENT (HSE)

 

 

 

1. FIRE SAFETY AND FIRST AID SEMINAR

 

Cellophil Resources Corporation

 

Gaddani,Tayum,Abra,Philippines

 

 

 

2. HSE ORIENTATION SEMINAR

 

Safety Technical Services

 

Muscat, Oman

 

 

 

3. H2S AWARENESS & ESCAPE

 

Safety Technical Services

 

Muscat, Oman

 

 

 

4. JOB HAZARD ASSESSMENT SEMINAR

 

Petroleum Development Oman

 

Fahud, Oman

 

 

 

5. PDO – PERMIT TO WORK – PERMIT HOLDER SEMINAR

 

Petroleum Development Oman

 

Fahud, Oman

 

 

 

6. PDO – COMPETENT ELECTRICAL PERSONNEL (CEP) LV COURSE

 

Petroleum Development Oman

 

Mina Al-Fahal, Muscat, Oman

 

 

 

7. PDO – INITIAL FIRE RESPONSE

 

Petroleum Development Oman

 

Fahud, Oman

 

 

 

8.PDO – PERMIT TO WORK – PERMIT APPLICANT SEMINAR

 

Petroleum Development Oman

 

Fahud, Oman

 

 

 

9.PDO – GAS TESTING TRAINING

 

Petroleum Development Oman

 

Fahud, Oman

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROFESSIONAL WORKING EXPERIENCES:

 

 

 

JULY 2011PRESENT      JACOBS – ZATE ENGINEERING INC.

 

       (PROJECT MANAGEMENT CONSULTANT (PMC) FOR MARAFIQ STG #5 & #6)

 

       MARAFIQ – YANBU

 

       KINGDOM OF SAUDI ARABIA

 

 

 

       ASSISTANT RESIDENCE ENGINEER (INSTRUMENTATION & CONTROL)

 

      

 

  • Basic Function and Scope:

 

To provide general instrument and controls engineering support to the Construction and the Operations team during the project EPC and Startup Phases to ensure operational readiness. To contribute to the resolution of instrument and controls operations, reliability and maintenance issues during the engineering and construction phases of the project.

 

Upon completion of the project, coordinate with main EPC contractor for the Test packages, handing over of documentation, and O&M manuals. To provide expert engineering technical support to ensure that a wide range of instrument & control systems in the STG #5 & #6 are operated and maintained in line with best world-class practices and standards.

 

 

 

  • Task, Duties, and Accountabilities:
    • To direct and coordinate the activities as Client representative to the Main EPC Contractor of multi-disciplinary technical experts in the Instrumentation and Control section ensuring the proper erection and construction in line with correct practices of the Instrument & Controls systems of the plant.
    • To provide technical inputs to MARAFIQ – STG #5 & #6 projects and extend the required support and assistance during commissioning and startup.
    • To enforce the implementation of Company Health, Safety and Environment Management System (HSE-MS) and asset integrity reliability management system (AIRMS), and promote awareness of its use among Main EPC Contractor and its sub-contractors.
    • To monitor and inspect construction activities and identify opportunities to improve the performance of Instrument, DCS, ESD system, Fire & Gas system, custody meters  & Telecom and Paging system.
    • To control and authorize implementation of application software modification in DCS, ESD system, Advance Process control and Real Time Information systems.
    • To ensure the documentation and security of control software, system backups, and policies and procedures manuals upon completion of the project.
    • Collaborates and provides appropriate consultation with the Main EPC Contractor’s Instrument and Controls engineers, Process engineers and HSE engineers in the Central Engineering organization.

 

 

 

 

 

APRIL 2009JUNE 2011      THOMASSEN SERVICES & CONTRACTING CO. LLC

 

         (MAIN CONTRACTOR FOR MAINTENANCE OF PDO POWER GENERATION UNITS)

 

         PO BOX 476 – AL-HARTHY COMPLEX

 

         MUSCAT – 118

 

         SULTANATE OF OMAN

 

 

 

         INSTRUMENTATION & CONTROL ENGINEER

 

 

 

 AREA OF RESPONSIBILITY: INSTRUMENTATION AND CONTROL OF:

 

 FRAME 5, 6, 6FA, & 9E DLN – GAS TURBINE INSTRUMENTATION & GE-SPEEDTRONICS CONTROL

 

⇒FRAME 5, 6, 6FA, & 9E DLN – GAS TURBINE GENERATOR INSTRUMENTATION & CONTROL

 

⇒MARK II, MARK IV, MARK V, & MARK VI GE SPEEDTRONICS GAS TURBINE CONTROL SYSTEM

 

⇒GAS TURBINE, GENERATOR, AND FACILITIES SAFEGUARDING FIRE & GAS PROTECTION SYSTEM⇒TURBINE & GENERATOR AIR FILTER / PULSING SYSTEM

 

BOP GAS TREATMENT AND PRESSURE REDUCING STATION

 

 

 

JOB DESCRIPTION:

 

⇨Responsible for the annual maintenance (CI, HGPI, MAJOR) overhaul of Mark II, IV, V, & VI – GE Speedtronics Gas Turbine Control System, and start-up of the machine after annual maintenance

 

⇨Responsible for the annual maintenance (CI, HGPI, MAJOR) overhaul ON/OFF based field instruments like Calibration check within tolerable limits

 

⇨Responsible for the total maintenance and functional checks of Gas Turbine, Generator, and Facilities Safeguarding Fire & Gas Protection & Detection system

 

⇨Responsible for the repair & maintenance/calibration checks of gas treatment & pressure reducing station field instrumentation

 

⇨Monitor stock level of spare parts, tools, and materials using Computerized Stock Inventory System for the annual CI, HGPI, or MAJOR overhaul of Gas Turbine Generators

 

 

 

 

 

 

 

APRIL 2006 APRIL 2009    THOMASSEN SERVICES & CONTRACTING CO. LLC

 

         (MAIN CONTRACTOR FOR MAINTENANCE OF PDO POWER GENERATION UNITS)

 

         PO BOX 476 – AL-HARTHY COMPLEX

 

         MUSCAT – 118

 

         SULTANATE OF OMAN

 

 

 

         INSTRUMENTATION & CONTROL / FIRE & GAS TECHNICIAN

 

 

 

 AREA OF RESPONSIBILITY: INSTRUMENTATION AND CONTROL OF:

 

 FRAME 5, 6, 6FA, & DLN – GAS TURBINE INSTRUMENTATION & GE-SPEEDTRONICS CONTROL

 

⇒FRAME 5, 6, 6FA, & DLN – GAS TURBINE GENERATOR INSTRUMENTATION & CONTROL

 

⇒TURBINE & GENERATOR AIR FILTER / PULSING SYSTEM

 

⇒MARK II, MARK IV, & MARK V GE SPEEDTRONICS GAS TURBINE CONTROL SYSTEM

 

⇒GAS TURBINE, GENERATOR, AND FACILITIES SAFEGUARDING FIRE & GAS PROTECTION SYSTEM

 

BOP GAS TREATMENT AND PRESSURE REDUCING STATION

 

 

 

JOB DESCRIPTION:

 

⇨Responsible for the start-up, commissioning, and total maintenance of Mark II, IV, & V – GE Speedtronics Gas Turbine Control System

 

⇨Responsible for the commissioning, and total maintenance of Gas Turbine, Generator, and Facilities Safeguarding Fire & Gas Protection & Detection system

 

⇨Responsible for the commissioning, and repair & maintenance of gas treatment & pressure reducing station

 

⇨Monitor stock level of spare parts, tools, and materials using Computerized Stock Inventory System   

 

 

 

 

 

 

 

 

 

APRIL 2005APRIL 2006        BAHRAIN ELECTRICITY SUPPLY & TRANSMISSION W.L.L.

 

CAPTIVE POWER STATION

 

HIDD, KINGDOM OF BAHRAIN

 

 

 

INSTRUMENTATION & CONTROL / FIRE & GAS TECHNICIAN

 

AREA OF RESPONSIBILITY: INSTRUMENTATION AND CONTROL OF:

 

⇒15 MW GAS TURBINE

 

⇒32 MW GAS TURBINE GENERATOR

 

⇒SENTINEL C GAS TURBINE CONTROL SYSTEM

 

⇒GAS TURBINE, GENERATOR, AND FACILITIES SAFEGUARDING FIRE & GAS PROTECTION SYSTEM

 

⇒TURBINE & GENERATOR AIR FILTER / PULSING SYSTEM

 

⇒GAS PRESSURE REDUCING STATION

 

 

 

JOB DESCRIPTION:

 

⇨Responsible for the Commissioning, and Total Maintenance of Allen-Bradley PLC-5 Programmable Logic Controllers for Sentinel C Gas Turbine Control System and star-up of the machine after annual maintenance

 

⇨Responsible for the Commissioning, and Total Maintenance of Gas Turbine, Generator, and Facilities Safeguarding Fire & Gas Protection and Detection System

 

⇨Responsible for the commissioning, and total maintenance of communications system used in the Power Plant wide which includes, EPABX & telephone units.

 

⇨Involved in the design, development, specification, and acquisition of additional instruments for the expansion, and modification of unreliable existing process control system

 

⇨Completed design and Implementation of Computerized Preventive Maintenance Management System for continuous machine operation, resulting to increased machine run ability and minimize downtime.

 

⇨Recommends renovations of existing Instrumentation Control Loops for more safety of machine operators and maintenance crew

 

⇨Monitor stock level of spare parts, tools, and materials using Computerized Stock Inventory System   

 

 

 

 

 

 

 

AUG 2002 – APRIL 2005           DANWAY ELECTRICAL & MECHANICAL ENGINEERING   

 

Sub-contractor of FISIA ITALIMPIANTI

 

COMBINED CYCLE POWER & DESALINATION PLANT PROJECT

 

RUWAIS, ABU DHABI

 

UNITED ARAB EMIRATES

 

 

 

INSTRUMENTATION SUPERVISOR                                                                

 

 

 

 

 

AREA OF RESPONSIBILITY: INSTRUMENTATION AND CONTROL OF:

 

  Seawater Screening, Chlorination, & Pumping Station

 

⇒Distillers / Evaporators (6 units of 16 Million Gallons per day)

 

⇒ Re-mineralization and Potable Water Pumping Station

 

 

 

JOB DESCRIPTION:

 

⇨Material take-off as per hook-up drawings and generate reports for the materials required in the whole instrumentation section of the Desalination plant.

 

⇨Generates schedule of works to be done in Daily basis, forecast schedule in weekly basis, and generates daily activity reports, as well as weekly progress reports for the Instrumentation section of the Desalination plant.

 

⇨Project lead supervisor in the construction, erection and implementation of approved C&I construction drawings for the Instrumentation and process controls of the Desalination Plant.

 

⇨Involved in the quality inspection of erected field instruments and process control devices, recommends and correct process control loop so that efficient control system would be achieved and minimize equipment downtime.

 

⇨Involved in the calibration, pre-commissioning, and testing of field instrument and control system after erection had been completed

 

⇨Involved in the documentation of as built drawings for the C & I of the whole Desalination plant.

 

⇨Take charged in maintaining discipline among personnel under my supervision, training, records keeping, and evaluating subordinate performance.

 

 

 

 

 

JAN 1997 – FEB 2002               PT RIAU ANDALAN KERTAS       

 

A MEGA PAPER MILL INDUSTRY

 

Riau, Sumatera, Indonesia

 

 

 

 INSTRUMENTATION / AUTOMATION SPECIALIST                                                  

 

 

 

AREA OF RESPONSIBILITY: INSTRUMENTATION AND CONTROL OF:

 

  Bale Pulper, Chemical / Stock preparation area,

 

⇒Paper Machine (VALMET – 9 meters paper wide x 1500 Meters per minute speed)

 

⇒Winders and Rewinders (Jagenberg – Germany)

 

⇒Roll Wrapping machine and Intermediate Roll Storage

 

⇒Polio Sheeters Cut Size Sheeters, Ream Wrappers, Cartonizers, Palletizers

 

⇒Shrinking & Packaging System

 

 

 

JOB DESCRIPTION:

 

⇨Project Lead Engineer in the construction, commissioning, & Start-up of ABB-DCS, VALMET-DAMATIC XD (MCS) and Instrumentation portions of the 1200 MT/D Mega Paper Mill

 

⇨Responsible for the total repair & maintenance of process instruments, Paper machine control / automation system, Winders & Re-winders automation system, Roll wrapping machine automation, Intermediate roll storage automation system, Polio & Cut size sheeters automation, Ream wrapper automation, cartonizer automation, Palletizer automation, & Packaging system automation.

 

⇨Completed Design and Implemented Computerized Preventive Maintenance Management System for excellent machine run ability, and increased profitability.

 

⇨Involved in the preparation for the Calibration Procedures, Conduct Trainings, and Implementations in readiness for acquiring Certifications for ISO 9002 Quality Assurance International Standards

 

⇨Involved in the supervision to resolve the Y2K compliance of all instruments for the new Millenium

 

⇨Reviewed and corrected VALMET Damatic XD DCS configuration & programming, and Instrumentation Process Control Loops for more efficient Process Control, resulting to better product quality

 

⇨Reviewed and corrected Allen Bradley PLC-5 configuration & programming for better and efficient machine automation use in Folio Sheeters, Cut-size Sheeters, Wrapping lines, Cartonizers, Palletizers and Packaging systems.

 

⇨Recommended renovations of existing Process Control Systems; and Automation for more safety and continuous machine operations considering the safety of the Operators, and maintenance crews

 

⇨In-charged in the training of Instrumentation technician in the repair, fault finding, troubleshooting and maintenance of process instruments and control devices

 

⇨Monitored stock level of spare parts, tools, and materials using Computerized Stock Inventory System

 

 

 

 

 

 

 

DEC 1984 – DEC 1996              OMAN MINING COMPANY LLC       

 

COPPER AND GOLD PROCESSING / MINING INDUSTRY

 

Sohar, Batinah Region Sultanate of Oman (Middle East)

 

 

 

ELECTRICAL / INSTRUMENTATION TECHNICIAN

 

                                               

 

AREA OF RESPONSIBILITY: INSTRUMENTATION & CONTROL OF:

 

 Primary Crusher, Primary ball mill, Carbon-gold extraction leaching tank

 

⇒Gas boilers, Gas furnace, Electro-winning cells, & dewatering filter machine

 

⇒Concentrator’s primary & secondary ball mills, Copper Flotation, Rotary Kiln dryers

 

⇒Pelletizing plant, Copper Smelting Electric Furnace, Anode converters, & Anode Furnace

 

⇒Anode casting machine, & 99.8% Copper cathode refinery plant

 

 

 

JOB DESCRIPTION:

 

⇨Responsible for the start-up, commissioning, and total Maintenance of Allen-Bradley SLC-500 Programmable Logic Controllers for Motor controls and Inter-locking; Electrical installations and machineries; and Instrumentations used in 1200 MT/D GOLD processing .

 

⇨Responsible for the star-up, commissioning, and total maintenance of Electrical installations and machineries, and Instrumentation Process Control System used in 3000 MT/D COPPER Processing Plant.

 

⇨Responsible for the star-up, commissioning, and total repair & maintenance of SCADA, RTU, & Telemetry system used in remote seawater booster pumping stations

 

⇨Responsible for the commissioning, and total maintenance of Communications system used in the Plant wide which includes, EPABX, Radio links, Radio remote control scoop loaders, and CATV system.

 

⇨Involved in the design, development, specification, and acquisition of additional instruments for the expansion, and modification of unreliable existing process control system

 

⇨Completed design and Implementation of Computerized Preventive Maintenance Management System for continuous machine operation, resulting to increased machine run ability and minimize downtime.

 

⇨Reviewed and corrected Electrical Controls as well as Instrumentation Process Control Loops for more efficient machine operations and increased product quality.

 

⇨Recommended renovations of existing Electrical Installations and Instrumentation Control Loops for more safety of machine operators and maintenance crews

 

⇨Monitored stock level of spare parts, tools, and materials using Computerized Stock Inventory System

 

 

 

 

 

 

 

AUG 1981DEC 1984              CELLOPHIL RESOURCES CORPORATION    

 

UNBLEACHED CRAFT PULP MILL

 

Gaddani, Tayum, ABRA Philippines

 

 

 

 ELECTRONICS SUPERVISOR

 

 

 

AREA OF RESPONSIBILITY: INSTRUMENTATION AND CONTROL OF:

 

⇒Wood Chipping Area, Cooking Section, Washing Section, Pulp Dewatering Machine, Pulp Machine

 

⇒Steam Turbine Power Generation, Recovery Boiler, Lime Kiln, & Water Treatment Plant

 

⇒Researced and Laboratory / Analytical Instruments

 

 

 

JOB DESCRIPTION:

 

⇨Responsible for the start-up, commissioning, and repair and maintenance of the following:

 

A) Electronics and Pneumatics Instrumentation associated in Lime kiln; Chips cooking plant; Pulp washing plant; Pulp dewatering plant; Recovery boilers; Evaporators; 10.6 MW Steam turbine generator and Water treatment plant.

 

B) Industrial Electronics such as: Recovery boiler Electrostatic Precipitator; Chipper/Crusher metal detectors; Variable speed DC drives in Pulp dewatering machines; Turbo turn Electronics speed supervision and control system of Steam Turbine Generator; and automatic bale machines.

 

C) Communications System such as: GTE crossbar exchange; Communique portable radio transceivers; Radio repeaters; and Intercom and paging system.

 

 

 

⇨In-charged in the design, development, specification, and procurement of additional instruments for expansion and modifications of unreliable existing process control system.

 

⇨Prepared preventive maintenance schedules for Instrumentation, Industrial Electronics, and Communication System.

 

⇨Monitored performance and results for safer, reliable, and more efficient operation considering the safety of operators, and maintenance crews

 

⇨Take charged in maintaining discipline among personnel under my supervision, training, records keeping, and evaluating subordinate performance.

 

⇨Assisted Electrical engineer in the preparation of annual budget in Electronics, Instrumentation, and Communication spare parts and workshop equipments

 

⇨Monitored stock level of spare parts & initiate stock level to purchase using computerized Stock Inventory Management system.    

 

 

 

 

 

 

 

MAY 1978 – AUG 1981             MSU-ILIGAN INSTITUTE OF TECHNOLOGY

 

A Technological Institution / School

 

Tibanga, Iligan City Mindanao, Philippines

 

 

 

 ELECTRONICS LABORATORY TECHNICIAN

 

                                              

 

 JOB DESCRIPTION:

 

 

 

⇨Responsible for the repair and maintenance of all electronics equipment; Instrument; and Electronics trainers used in the University and Technological Institution like Digital & analog multi meters, Oscilloscopes, Power supplies, AF & RF generators, watt meters, LAB-VOLT laboratory equipment & trainers.

 

⇨Prepared the laboratory equipments; trainers; and tools needed and assist Laboratory classes from time to time.

 

⇨Make some improvements on trainers and fabricated other trainers that would make Laboratory classes more efficient.  Conducts inventory of equipment and tools used during laboratory classes from time to time.

 

 

 

 

 

 

 

May 1978 – Aug 1981               ILIGAN CITY TECHNICAL INSTITUTE

 

A Technical Institution / School

 

Iligan City Mindanao, Philippines

 

 

 

 

 

PART TIME INSTRUCTOR                                                                              

 

 

 

JOB DESCRIPTION:

 

⇨Conducted lectures on Basic Electronics, Electronic Devices, Industrial Electronics, Instrumentation and Control Sys.  ⇨Conducted Lectures on Principles of Communication system such as: EPABX; AM/FM Radio transceivers, and receivers, VHF and UHF radio transceivers, Radar and Microwave system.

 

⇨Conducts laboratory classes on Basic Electronics devices, Industrial transducers, Instrumentation and control system, Transceivers operation and maintenance

 

 

 

 

 

 

 

EDUCATIONAL ATTAINMENT:

 

 

 

BACHELOR OF SCIENCE IN ELECTRICAL ENGINEERING                             1974 – 1978                                          

 

– Electrical Machine and Controls Design including Variable speed drive controls and PLC system.

 

 

 

MINDANAOSTATEUNIVERSITY

 

MarawiCity, Mindanao, Philippines

 

 

 

 

 

DIPLOMA IN ELECTRONICS ENGINEERING TECHNOLOGY                             1973 – 1976

 

– Major in Communications and Industrial Electronics with volunteer instructors from Netherland for three years to introduce Electronics Engineering Technology which includes lectures on Basic Electronics Circuits and components, Advance Electronics Control techniques, and Design of Electronics Control systems.

 

MINDANAOSTATEUNIVERSITY

 

ILIGAN INSTITUTE OF TECHNOLOGY

 

IliganCity, Mindanao, Philippines

 

__________________________________________________________________________

 

 

 

ELIGIBILITY:

 

1. CAREER SERVICE PROFESSIONAL                                    PASSED – 71.83 %

 

2. ELIGIBLE ELECTRONICS LABORATORY TECHNICIAN      Unassembled Examination

 

 

 

AWARDS RECEIVED:

 

1. Graduated in Electronics Engineering Technology with HIGHEST HONORS     Average Grade – 1.25

 

2. Academic Distinction Awardee     SY 1974 – 1975

 

                                  

 

 SPORTS:

 

1. Golf (H/C = 16)

 

2. Lawn Tennis

 

3. Table Tennis

 

 

 

 

 

PERSONAL DETAILS:

 

 

 

Marital Status         : Married

 

Nationality              : Filipino

 

Date of birth           : February 23, 1957

 

Languages Spoken: English / Tagalog / Bahasa Indonesia

 

Passport Number   : EB2084904

 

Passport Expires    : March 14, 2016

 

 

Advertisements